JAMB Syllabus For Chemistry Examination 2024/2025 (Download PDF)

JAMB syllabus for Chemistry in PDF: JAMB Chemistry syllabus is one of the essential materials for Passing JAMB Chemistry examination because it contains likely topics from which questions will be asked in the impending JAMB UTME examination. Aside from past questions and answers, JAMB syllabuses can help you to prepare extensively and pass any JAMB examination. Consequently, in this post I am going to share the PDF format of JAMB Chemistry syllabus for 2024/2025.

I enjoin any student who is going to take the impending JAMB Chemistry exam to download this syllabus, go through it and study with it for success.

Complete JAMB syllabus for Chemistry exam. JAMB Chemistry syllabus for 2024 UTME examination. Download JAMB Chemistry syllabus in PDF
Complete JAMB syllabus for Chemistry exam. JAMB Chemistry syllabus for 2024 UTME examination. Download JAMB Chemistry syllabus in PDF

Also see: How to prepare and pass JAMB examination with flying colors

Aim of JAMB Chemistry Examination

The aim of the Unified Tertiary Matriculation Examination (UTME) syllabus in Chemistry is to prepare the candidates for the Board’s examination. It is designed to test their achievement of the course objectives, which are to:

(i) understand the basic principles and concepts in chemistry;

(ii) interpret scientific data relating to chemistry;

(iii) deduce the relationships between chemistry and other sciences;

(iv) apply the knowledge of chemistry to industry and everyday life.

Also read:

Complete JAMB syllabus for Chemistry 2024/2025

Topic 1: Separation of mixtures and purification of chemical substances

(a) Pure and impure substances

(b) Boiling and melting points.

(c) Elements, compounds and mixtures

(d) Chemical and physical changes.

(e) Separation processes: evaporation, simple and fractional distillation, sublimation, filtration, crystallization, paper and column chromatography, simple and fractional crystallization, magnetization, decantation.

Expectations from candidates

Candidates should be able to:
(i) distinguish between pure and impure substances;

(ii) use boiling and melting points as criteria for purity of chemical substances;

(iii) distinguish between elements, compounds and mixture;

(iv) differentiate between chemical and physical changes;

(v) identify the properties of the components of a mixture;

(vi) specify the principle involved in each separation method.

(vii) apply the basic principle of separation processes in everyday life.

Also read:

Topic 2: Chemical combination

Stoichiometry, laws of definite and multiple proportions, law of conservation of matter, Gay Lussac’s law of combining volumes, Avogadro’s law; chemical symbols, formulae, equations and their uses, relative atomic mass based on 12C=12, the mole concept and Avogadro’s number.

Expectations from candidates:

Candidates should be able to:
(i) perform simple calculations involving formulae, equations/chemical composition and the mole concept;

(ii) deduce the chemical laws from given expressions/statements/data;

(iii) interpret graphical representations related to these laws;

(iv) deduce the stoichiometry of chemical reactions.

Topic 3: Kinetic theory of matter and Gas Laws

(a) An outline of the kinetic theory of matter;

(i) melting,

(ii) vapourization

(iii) boiling

(iv) freezing

(v) condensation in terms of molecular motion and Brownian movement.

(b)(i) The laws of Boyle, Charles, Graham and Dalton (law of partial pressure); combined gas law, molar volume and atomicity of gases

(ii) The ideal gas equation (PV = nRT).

(iii) The relationship between vapour density of gases and the relative molecular mass.

What candidates are supposed to know in this topic

Candidates should be able to: (i) apply the theory to distinguish between solids, liquids and gases;

(ii) deduce reasons for change of state

(iii) draw inferences based on molecular motion;

(iv) deduce gas laws from given expressions/statements;

(v) interpret graphical representations related to these laws;

(vi) perform simple calculations based on these laws, equations and relationships

Topic 4: Atomic structure and bonding

(a) (i)The concept of atoms, molecules and ions, the works of Dalton, Millikan, Rutherford, Moseley, Thompson and Bohr.

(ii) Atomic structure, electron configuration, atomic number, mass number and isotopes; specific examples should be drawn from elements of atomic number 1 to 20.

(iii) Shapes of s and p orbitals.

(b) The periodic table and periodicity of
elements, presentation of the periodic table with a view to recognizing families of elements e.g. alkali metals, halogens, the noble gases and transition metals. The variation of the following properties: ionization energy, ionic radii, electron affinity and electronegativity.

(c) Chemical bonding. Electrovalency and covalency, the electron configuration of elements and their tendency to attain the noble gas structure. Hydrogen bonding and metallic bonding as special types of electrovalency and covalency respectively; coordinate bond as a type of covalent bond as illustrated by complexes like [Fe(CN)6] 3-, [Fe(CN)6] 4-, [Cu(NH3)4] 2+ and [Ag(NH3)2] +; van der Waals’ forces should be mentioned as a special type of bonding forces.

(d) Shapes of simple molecules: linear ((H2, O2, C12,HCl and CO2), non-linear (H2O) and tetrahedral; (CH4) and pyramidal (NH3).

Topic 5: Nuclear Chemistry

(i) Radioactivity – Types and properties of radiations

(ii) Nuclear reactions. Simple equations, uses and applications of natural and artificial radioactivity.

What candidates are supposed to know in this topic

Candidates should be able to:
(i) distinguish between atoms, molecules and ions;

(ii) identify the contributions of these scientists to the development of the atomic structure;

(iii) deduce the number of protons, neutrons and electrons from atomic and mass numbers of an atom;

(iv) apply the rules guiding the arrangement of electrons in an atom;

(v) identity common elements exhibiting isotopy;

(vi) relate isotopy to mass number;

(vii) perform simple calculations relating to isotopy;

(viii) differentiate between the shapes of the orbitals;

(ix) determine the number of electrons in s and p atomic orbitals;

(x) relate atomic number to the position of an element on the periodic table;

(xi) relate properties of groups of elements on the periodic table;

(xii) identify reasons for variation in properties across the period and down the groups.

(xiii) differentiate between the different types of bonding.
(xiv) deduce bond types based on electron configurations;
(xv) relate the nature of bonding to properties of compounds;

(xvi) differentiate between the various shapes of molecules

(xvii) distinguish between ordinary chemical reaction and nuclear reaction; (xviii) differentiate between natural and artificial radioactivity;

(xix) compare the properties of the different types of nuclear radiations;

(xx) compute simple calculations on the half-life of a radioactive material;

(xxi) balance simple nuclear equation;

(xxii) identify the various applications of
radioactivity

Topic 6: Air

(a) The natural gaseous constituents and
their proportion in the air.
– NITROGEN, oxygen, water vapour, CARBON (IV) oxide and the noble gases (argon and neon).

(b) Air as a mixture and some uses of the
noble gas.

What candidates are expected to know in this topic

Candidates should be able to:

(i) deduce reason (s) for the existence of air as a mixture;

(ii) identify the principle involved in the
separation of air components;

(iii) deduce reasons for the variation in the composition of air in the environment;

(iv) specify the uses of some of the constituents of air.

Topic 7: Water

(a) Water as a product of the combustion of hydrogen and its composition by volume.

(b) Water as a solvent, atmospheric gases dissolved in water and their biological significance.

(c) Hard and soft water:

Temporary and permanent hardness and methods of softening hard water.

(d) Treatment of water for town supply.

(e) Water of crystallization, efflorescence, deliquescence and hygroscopy. Examples of the substances exhibiting these properties and their uses.

What candidates are expected to know in this topic

Candidates should be able to:
(i) identify the various uses of water;

(ii) identity the effects of dissolved atmospheric gases in water;

(iii) distinguish between the properties of hard and soft water;

(iv) determine the causes of hardness;

(v) identify methods of removal of hardness;

(vi) describe the processes involved in the treatment of water for town supply;

(vii) distinguish between these phenomena;

(viii) identify the various compounds that exhibit these phenomena.

Topic 8: Solubility

(a) Unsaturated, saturated and supersaturated solutions. Solubility curves and simple deductions from them (solubility defined in terms of mole per dm3) and simple calculations Solvents for fats, oil and paints and the use of such solvents for the removal of stains.

(c) False solution (Suspensions and colloids): Properties and examples.

Harmattan haze and water paints as examples of suspensions and fog, milk, aerosol spray, emulsion paints and rubber solution as examples of colloids.

What candidates are expected to know in this topic

Candidates should be able to:
(i) distinguish between the different types of solutions;

(ii) interpret solubility curves;

(iii) calculate the amount of solute that can dissolve in a given amount of solvent at a given temperature;

(iv) deduce that solubility is temperature-dependent; relate nature of solvents to their uses;

(vi) differentiate among true solution,
suspension and colloids;

(vii) compare the properties of a true solution and a ‘false’ solution.

(viii) provide typical examples of suspensions and colloids.

What candidates are supposed to know in this topic

Topic 9: Environmental Pollution

(a) Sources and effects of pollutants.

(b) Air pollution: Examples of air pollutants such as H2S, CO, SO2, oxides of nitrogen, chlorofluorocarbons and dust.

(c) Water pollution Sewage and oil pollution should be known.

(d) Soil pollution: Oil spillage, Biodegradable and non-biodegradable pollutants

What candidates are supposed to know in this topic

Candidates should be able to:
(i) identify the different types of pollution and pollutants;

(ii) specify different sources of pollutants

(iii) classify pollutants as biodegradable and non-biodegradable;

(iv) specify the effects of pollution on the environment;

(v) identify measures for control of environmental pollution.

Topic 10: Acids, bases and salts

(a) General characteristics and properties of acids, bases and salts. Acids/base indicators, basicity of acids; normal, acidic, basic and double salts. An acid defined as a substance whose aqueous solution furnishes H3O+ ions or as a proton donor. Ethanoic, citric and tartaric acids as examples of naturally occurring organic acids, alums as examples of double salts, preparation of salts by neutralization, precipitation and action of acids on metals. Oxides and trioxocarbonate (IV) salts

(b) Qualitative comparison of the conductances of molar solutions of strong and weak acids and bases, relationship between conductance and amount of ions present.

(c) pH and pOH scale; Simple calculations

(d) Acid/base titrations.

(e) Hydrolysis of salts: Principles Simple examples such as NH4Cl, AlCl3, Na2CO3 and CH3COONa

What candidates are expected to know in this topic

Candidates should be able to:
(i) distinguish between the properties of acids and bases;

(ii) identify the different types of acids and bases;

(iii) determine the basicity of acids;

(iv) differentiate between acidity and alkalinity using acid/base indicators;

(v) identify the various methods of preparation of salts;

(vi) classify different types of salts;

(vii) relate degree of dissociation to strength of acids and bases;

(viii) relate degree of dissociation to conductance;
(ix) perform simple calculations on pH and pOH;
(x) identify the appropriate acid-base indicator;

(xi) interpret graphical representation of titration curves;

(xii) perform simple calculations based on the mole concept;

(xiii) balance equations for the hydrolysis of salts;

(xiv) deduce the properties (acidic, basic, neutral) of the resultant solution.

Topic 11: Oxidation and reduction

(a) Oxidation in terms of the addition of
oxygen or removal of hydrogen.

(b) Reduction as removal of oxygen or addition of hydrogen.

(c) Oxidation and reduction in terms of
electron transfer.

(d) Use of oxidation numbers.
Oxidation and reduction treated as change in oxidation number and use of oxidation numbers in balancing simple equations.

(e) IUPAC nomenclature of inorganic compounds using oxidation number.

(f) Tests for oxidizing and reducing agents.

What candidates are supposed to know in this topic

Candidates should be able to:

(i) identify the various forms of expressing oxidation and reduction;

(ii) classify chemical reactions in terms of
oxidation or reduction;

(iii) balance redox reaction equations;
(iv) deduce the oxidation number of chemical species;

(v) compute the number of electron transfer in redox reactions;

(vi) identify the name of redox species in a reaction

(vii) distinguish between oxidizing and reducing agents in redox reactions.

(viii) apply oxidation number in naming inorganic compounds

(ix) relate reagents to their oxidizing and reducing abilities.

Topic 12: Electrolysis

(a) Electrolytes and non-electrolytes. Faraday’s laws of electrolysis.

(b) (i) Electrolysis of dilute H2SO4, aqueous CuSO4, CuC12 solution, dilute and concentrated NaC1 solutions and fused NaC1

(ii) Factors affecting discharge of ions at
the electrodes.

Uses of electrolysis: Purification of metals e.g. copper and production of elements and compounds (Al, Na, O2, Cl2 and NaOH).

(d) Electrochemical cells: Redox series (K, Ca, Na, Mg, Al, Zn, Fe, Sn, Pb, H, Cu, Hg, AG, Au,) half-cell reactions and electrode potentials. (Simple calculations only).

(e) Corrosion as an electrolytic process, cathodic protection of metals, painting, electroplating and coating with grease or oil as ways of preventing iron from corrosion

What candidates are supposed to know in this topic

Candidates should be able to:
(i) distinguish between electrolytes and non-electrolytes;

(ii) perform calculations based on faraday as a mole of electrons.

(iii) identify suitable electrodes for different electrolytes.

(iv) specify the chemical reactions at the electrodes;

(v) determine the products at the electrodes;

(vi) identify the factors that affect the products of electrolysis;

(vii) specify the different areas of application of electrolysis;

(viii) identify the various electrochemical cells;

(ix) calculate electrode potentials using half-cell reaction equations;

(x) determine the different areas of application of electrolytic processes;

(xi) identify methods used in protecting metals.

Topic 13: Energy changes

(a) Energy changes(∆H) accompanying physical and chemical changes: dissolution of substances in/or reaction with water e.g. Na, NaOH, K, NH4Cl. Endothermic (+∆H) and exothermic (-∆H) reactions.

(b) Entropy as an order-disorder phenomenon: simple illustrations like mixing of gases and dissolution of salts.

(c) Spontaneity of reactions: ∆G0 = 0 as a criterion for equilibrium, ∆G greater or less than zero as a criterion for non-spontaneity or spontaneity respectively.

What candidates are expected to know in this topic

Candidates should be able to:
(i) determine the types of heat changes (∆H) in physical and chemical processes;

(ii) interpret graphical representations of heat changes;

(iii) relate the physical state of a substance to the degree of orderliness;

(iv) determine the conditions for spontaneity of a reaction; (v) relate ∆H0, ∆S0 and ∆G0 as the driving forces for chemical reactions;

(vi) solve simple problems based on the
relationships ∆G0= ∆H0-T∆S

Topic 14: Rates of Chemical Reaction

(a) Elementary treatment of the following factors which can change the rate of a chemical reaction:

(i) Temperature e.g. the reaction between HCl and Na2S2O3 or Mg and HConcentration e.g. the reaction between HCl and Na2S2O3, HCl and marble and the iodine clock reaction, for gaseous systems, pressure may be used as concentration term.

(iii) Surface area e.g. the reaction between marble and HCl with marble in (i) powdered form (ii) lumps of the same mass.
(iv) Catalyst e.g. the decomposition of H2O2 or KClO3 in the presence or absence of MnO2

(b) Reaction rate curves.

(c) Activation energy Qualitative treatment of Arrhenius’ law and the collision theory, effect of light on some reactions. e.g. halogenation of alkanes

What candidates are supposed to know in this topic

Candidates should be able to:

(i) identify the factors that affect the rates of a chemical reaction;

(ii) determine the effects of temperature on the rate of reactions; examine the effect of concentration/pressure on the rate of a chemical reaction;

(iv) describe how the rate of a chemical reaction is affected by surface area;

(v) determine the types of catalysts suitable for different reactions and their effects;

(vi) determine ways of moderating these effects in chemical reactions.

(vii) interpret reaction rate curves;

(viii) solve simple problems on the rate of reactions;

(ix) relate the rate of reaction to the kinetic theory of matter.

(x) examine the significance of activation energy to chemical reactions.
(xi) deduce the value of activation energy (Ea) from reaction rate curves

Topic 15: Chemical equilibra

Reversible reactions and factors governing the equilibrium position. Dynamic equilibrium. Le Chatelier’s principle and equilibrium constant. Simple examples to include action of steam on iron and N2O4 2NO2. No calculation will be required.

What candidates are supposed to know in this topic

Candidates should be able to:
(i) identify the factors that affects the position of equilibrium of a chemical reaction; (ii) predict the effects of each factor on the position of equilibrium;

(iii) determine the effects of these factors on equilibrium constant.

Non-metals and their compounds

(a) Hydrogen: commercial production from water gas and cracking of petroleum fractions, laboratory preparation, properties, uses and test for hydrogen.

(b) Halogens: Chlorine as a representative element of the halogen. Laboratory preparation, industrial preparation by electrolysis, properties and uses, e.g. water sterilization, bleaching, manufacture of HCl, plastics and insecticides. Hydrogen chloride and Hydrochloric acid: Preparation and properties. Chlorides and test for chloride.

(c) Oxygen and Sulphur (i) Oxygen: Laboratory preparation, properties and uses.

Commercial production from liquid air. Oxides: Acidic,basic, amphoteric and neutral, trioxygen (ozone) as an allotrope and the importance of ozone in the atmosphere.

(ii) Sulphur: Uses and allotropes:
preparation of allotropes is not expected. Preparation, properties and uses of sulphur(IV) oxide, the reaction of SO2 with alkalis. Trioxosulphate (IV) acid and its salts, the effect of acids on salts of trioxosulphate(IV), Tetraoxosulphate(VI) acid: Commercial preparation (contact process only), properties as a dilute acid, an oxidizing and a dehydrating agent and uses. Test for SO42.

Hydrogen sulphide: Preparation and properties as a weak acid, reducing agent and precipitating agent. Test for S2-

(d) Nitrogen:

(i) Laboratory preparation

(ii) Production from liquid air

(iii) Ammonia:

Laboratory and industrial preparations (Haber Process only), properties and uses, ammonium salts and their uses, oxidation of ammonia to nitrogen

(IV) oxide and trioxonitrate

(V) acid.

Test for NH4 +

(iv) Trioxonitrate

(V) acid: Laboratory preparation from ammonia; properties. and uses. Trioxonitrate (V) salt-action of heat and uses. Test for NO3

(v) Oxides of nitrogen:
Properties.

The nitrogen cycle.

(e) Carbon: (i) Allotropes: Uses and properties (ii) Carbon(IV) oxide-Laboratory preparation, properties and uses. Action of heat on trioxocarbonate (IV) salts and test for CO3 2 (iii) Carbon(II) oxide: Laboratory preparation, properties including its effect on blood; sources of carbon (II) oxide to include charcoal, fire and exhaust fumes.

(iv) Coal: Different types, products obtained from destructive distillation of wood and coal.

(v) Coke: Gasification and uses.
Manufacture of synthetic gas and
uses.

What candidates are supposed to know in this topic

Candidates should be able to:

(i) predict reagents for the laboratory and industrial preparation of these gases and their compounds.

(ii) identify the properties of the gases and their compounds.

(iii) compare the properties of these gases and their compounds.

(iv) specify the uses of each gas and its compounds;

(v) determine the specific test for each gas and its compounds.

(vi) determine specific tests for Cl-, SO4 2-, SO3 2-, S2-, NH4+, NO3-, CO3 2-, HCO−3

(vii) predict the reagents for preparation, properties and uses HCl(g) and HCl(aq)

(viii) identify the allotropes of oxygen;

(ix) determine the significance of ozone to our environment.

(x) classify the oxides of oxygen and their properties

(xi) identify the allotropes of sulphur and their uses;

(xii) predict the reagents for preparation, properties and uses of SO2 and H2S;

(xiii) specify the preparations of H2SO4 and H2SO3, their properties and uses.

(xiv) specify the laboratory and industrial preparation of NH3;

(xv) identify the properties and uses of NH3;

(xvi) identify reagents for the laboratory preparation of HNO3, its properties and uses;

(xvii) specify the properties of N2O, NO, NO2 gases.

(xviii) examine the relevance of nitrogen cycle to the environment.

(xix) identify allotropes of carbon;

(xx) predict reagents for the laboratory preparation of CO2;

(xxi) specify the properties of CO2 and its uses;

(xxii) determine the reagents for the laboratory preparation of CO;

(xxiii) predict the effects of CO on human;

(xxiv) identify the different forms of coal:

(xxv) determine their uses;

(xxvi) specify the products of the destructive distillation of wood and coal;

(xxvii) specify the uses of coke and synthetic gas.

Topic 16: Metals and their compounds

(a) General properties of metals

(b) Alkali metals e.g. sodium (i) Sodium hydroxide: Production by electrolysis of brine, its action on aluminium, zinc and lead ions. Uses including precipitation of metallic hydroxides. (ii) Sodium trioxocarbonate (IV) and sodium hydrogen trioxocarbonate (IV): Production by Solvay process, properties and uses, e.g. Na2CO3 in the manufacture of glass. (iii) Sodium chloride: its occurrence in sea water and uses, the economic importance of sea water and the recovery of sodium chloride.

(c) Alkaline-earth metals, e.g. calcium; calcium oxide, calcium hydroxide and calcium trioxocarbonate (IV); Properties and uses. Preparation of
calcium oxide from sea shells, the chemical composition of cement and the setting of mortar. Test for Ca2+ Aluminium Purification of bauxite, electrolytic extraction, properties and uses of aluminium and its compounds. Test for A13+

(e) Tin Extraction from its ores. Properties and uses.

(f) Metals of the first transition series.

Characteristic properties:

(i) electron configuration

(ii) oxidation states

(iii) complex ion formation

(iv) formation of coloured ions

(v) catalysis

(g) Iron Extraction from sulphide and oxide ores, properties and uses, different forms of iron and their properties and advantages of steel over iron. Test for Fe2+ and Fe3+

(h) Copper Extraction from sulphide and oxide ores, properties and uses of copper. Preparation and uses of copper( II ) tetraoxosulphate(VI). Test for Cu2+
(i) Alloy Steel, stainless steel, brass, bronze, type- metal, duralumin, soft solder, permallory and alnico (constituents and uses only).

What candidates are supposed to know in this topic

Candidates should be able to:

(i) specify the general properties of metals

(ii) determine the method of extraction suitable for each metal;

(iii) relate the methods of extraction to the properties for the metals;

(iv) compare the chemical reactivities of the metals;

(v) specify the uses of the metals;

(vi) determine specific test for metallic ions;

(vii) determine the process for the production of the compounds of these metals;

(viii) compare the chemical reactivities of the compounds;

(ix) specify the uses of these compounds;

(x) specify the chemical composition of cement.

(xi) describe the method of purification of bauxite;

(xii) specify the ores of tin;

(xiii) relate the method of extraction to its
properties;

(xiv) specify the uses of tin;

(xv) identify the general properties of the first transition metals;

(xvi) deduce reasons for the specific properties of the transition metals;

(xvii) determine the IUPAC names of simple transition metal complexes

(xviii) determine the suitable method of extraction of iron;

(xix) specify the properties and uses of iron;

(xx) identify the different forms of iron, their compositions, properties and uses.

(xxi) identify the appropriate method of extraction of copper from its compounds;

(xxii) relate the properties of copper and its compound to their uses.

(xxiii) specify the method for the preparation of CuSO4;

(xxiv) specify the constituents and uses of the various alloys mentioned.
(xxv) compare the properties and uses of alloys to pure metals.

Topic 17: Organic Compounds

An introduction to the tetravalency of carbon, the general formula, IUPAC nomenclature and the determination of empirical formula of each class of the organic compounds mentioned below.

(a) Aliphatic hydrocarbons

(i) Alkanes

Homologous series in relation to physical properties, substitution reaction and a few examples and uses of halogenated products. Isomerism: structural only (examples on isomerism should not go beyond six carbon atoms).

Petroleum: composition, fractional distillation and major products; cracking and reforming,

Petrochemicals – starting materials of organic syntheses, quality of petrol and meaning of octane number.

(ii) Alkenes Isomerism: structural and geometric isomerism, additional and polymerization reactions, polythene and synthetic rubber as examples of products of polymerization and its use in vulcanization.

(iii) AlkynesEthyne – production from action of water on carbides, simple reactions and properties of ethyne.

(b) Aromatic hydrocarbons e.g. benzene – structure, properties and uses.

(c) Alkanols Primary, secondary, tertiary – production of ethanol by fermentation and from petroleum by-products. Local examples of fermentation and distillation, e.g. gin from palm wine and other local sources and glycerol as a polyhydric alkanol.

Reactions of OH group – oxidation as a distinguishing test among primary secondary and tertiary alkanols (Lucas test).

(d) Alkanals and alkanones.

Chemical test to distinguish between alkanals and alkanones.

(e) Alkanoic acids.

Chemical reactions; neutralization and esterification, ethanedioic (oxalic) acid as an example of a dicarboxylic acid and benzene carboxylic acid as an example of an aromatic acid.

Alkanoates Formation from alkanoic acids and alkanols – fats and oils as alkanoates. Saponification: Production of soap and margarine fromalkanoates and distinction between detergents and soaps.

(g) Amines (Alkanamines) Primary, Secondary, and tertiary

(h) Carbohydrates Classification – mono-, di- and polysaccharides; composition, chemical tests for simple sugars and reaction with concentrated tetraoxosulphate (VI) acid.

Hydrolysis of complex sugars e.g. cellulose from cotton and starch from cassava, the uses of sugar and starch in the production of alcoholic beverages, pharmaceuticals and textiles.

(i) Proteins: Primary structures, hydrolysis and tests (Ninhydrin, Biuret, Millon’s and xanthoproteic) Enzymes and their functions.

(j) Polymers: Natural and synthetic rubber; addition and condensation polymerization.

Methods of preparation, examples and
uses. Thermoplastic and thermosetting plastics.

What candidates are expected to know in this topic

Candidates should be able to:
(i) derive the name of organic compounds from their general formulae;

(ii) relate the name of a compound to its structure;

(iii) relate the tetravalency of carbon to its ability to form chains of compound (catenation)(iv) classify compound according to their functional groups;

(v) derive empirical formula and molecular formula, from given data;

(vi) relate structure/functional groups to specific properties;

(vii) derive various isomeric forms from a given formula;

(viii) distinguish between the different types of isomerism;

(ix) classify the various types of hydrocarbons;

(x) distinguish each class of hydrocarbons by their properties;

(xi) specify the uses of various hydrocarbons;

(xii) identify crude oil as a complex mixture of hydrocarbons;
(xiii) relate the fractions of hydrocarbons to their properties and uses;

(xiv) relate transformation processes to quality improvement of the fractions;

(xv) distinguish between various polymerization processes;

(xvi) specify the process involved in vulcanization;

(xvii) specify chemical test for terminal alkynes

(xviii) distinguish between aliphatic and aromatic hydrocarbons;

(xix) relate the properties of benzene to its structure

(xx) compare the various classes of alkanols;

(xxi) determine the processes involved in ethanol production;

(xxii) examine the importance of ethanol as an alternative energy provider;

(xxiii) distinguish the various classes of alkanols

(xxiv) differentiate between alkanals and alkanones;

(xxv) compare the various types of alkanoic acids;

(xxvi) identify natural sources of alkanoates;

(xxvii) specify the methods for the production of soap, detergent and margarine.

(xxviii) distinguish between detergent and soap;

(xxix) compare the various classes of alkanamine;

(xxii) (xxx) identify the natural sources of (xxiii) carbohydrates;

(xxxi) compare the various classes of

(xxv) carbohydrates

(xxxii) infer the products of hydrolysis and
dehydration of carbohydrates;

(xxxiii) determine the uses of carbohydrates;

(xxxiv) specify the tests for simple sugars

(xxxv) identify the basic structure of proteins;

(xxxvi) specify the methods and products of hydrolysis;

(xxxvii) specify the various tests for proteins;

(xxxviii) distinguish between natural and synthetic polymers;

(xxxix) differentiate between addition and condensation polymerization processes

(xl) classify natural and commercial polymers and their uses; (xli) distinguish between thermoplastics and thermosetting plastics.

Topic 18: Chemistry and Industry Chemical Industries

Types, raw materials and relevancies; Biotechnology.

What candidates are expected to know in this topic

Candidates should be able to:
(i) classify chemical industries interms of
products;

(ii) identify raw materials for each industry

(iii) distinguish between fine and heavy chemicals;

(iv) enumerate the relevance of each of these industries;

(v) relate industrial processes to biotechnology

JAMB Syllabus for Chemistry
JAMB Syllabus for Chemistry

How to download And Use JAMB Chemistry syllabus

Follow the steps below to download and use the syllabus contained in this page:

Step 1: Smart phone users should get a PDF reader or WPS installed into their devices. If you are using a Personal Computer (PC), make sure that your device can display PDF documents.

Step 2: Download the PDF file below and allow your device to download the file. You don’t have to worry about the amount of data it will consume because the file is not a big one.

Step 3: Now, go to DOWNLOADS in your file manager and check for the recently downloaded document.

Step 4: Click on the JAMB Chemistry syllabus and the file will be able to open automatically. If you have more than one PDF reader in your device, you may have to choose which of them would open the file.

If you painstakingly followed the steps above, you will be able to download and use the JAMB Chemistry syllabus contained in this page successfully.

Also read:

JAMB Syllabus for Chemistry (PDF Format)

Kindly click here to Download JAMB syllabuse for Chemistry examination

How to Pass JAMB Chemistry examination

1. Study past Questions and answers: Gone are those days when JAMB was used to asking new and more complex questions to make more students fail. These days, I think there are actually no more questions to ask. The examination body has probably touched every topic.

Currently, JAMB don’t usually ask New questions. Majority of the questions asked in JAMB Chemistry exam are usually repeated from previously asked ones. Sometimes, JAMB may change the way the question is asked, but if you really read and practice with your JAMB past questions and answers, you will see that jamb is majorly past questions and answers from previous years.

2. Pay attention to what is expected of you: When you go through the syllabus above, you will notice that aside from the topics mentioned, JAMB usually state what candidates are expected to know or understand. That is where you have to pay more attention because, in asking questions, JAMB will try as much as possible to make sure that candidates understand what they are answering.

Take for instance, the first topic in JAMB examination states that candidates should read:

Separation of mixtures and purification of chemical substances

(a) Pure and impure substances

(b) Boiling and melting points

(c) Elements, compounds and mixtures

(d) Chemical and physical changes

(e) Separation processes: evaporation, simple and fractional distillation, sublimation, filtration, crystallization, paper and column chromatography, simple and fractional crystallization, magnetization, decantation.

When reading everything that concerns separation of mixtures and purification of chemical substances, your concern should be on how to:

(i) distinguish between pure and impure
substances;

(ii) use boiling and melting points as criteria for purity of chemical substances;

(iii) distinguish between elements, compounds and mixture;

(iv) differentiate between chemical and physical changes;

(v) identify the properties of the components of a mixture;

(vi) specify the principle involved in each separation method.

(vii) apply the basic principle of separation processes in everyday life.

Doing this will help you to answer any possible question that is likely to come from this topic.

3. Give more time to studying chemistry: Chemistry is a probably one of the most difficult subjects to take in JAMB examination. To pass it, you have to give more time to it. Concentrate more on your chemistry examination and try to understand the basics of chemistry. Trust me; JAMB does not ask too difficult questions in JAMB Chemistry examinations. If you have gone through JAMB Chemistry past questions you will attest to this.

Recommended: Most Developed Countries in Africa

4. Understand the Syllabus: One essential aspect of effectively preparing for the JAMB Chemistry exams is gaining a comprehensive understanding of the syllabus. In order to achieve optimal results, it is imperative to take into account two key factors. First and foremost, it is advisable to thoroughly examine the syllabus. Begin by thoroughly perusing the Joint Admissions and Matriculation Board (JAMB) Chemistry syllabus. It is important to carefully document the subjects, subtopics, and the level of comprehension required for each concept.

How can I get high score in JAMB chemistry?
How can I get high score in JAMB chemistry?

This will provide a comprehensive outline of the topics that need to be addressed. Additionally, it is important to break down topics. The syllabus should be divided into smaller, more manageable sections. Each topic and subtopic can serve as an independent unit of study. This methodology aids in mitigating the risk of becoming overwhelmed and enhances the organization and structure of one’s study plan.

Recommended: Richest States In The US By Income 2024

5. Study Resources: Utilize recommended academic materials such as textbooks, study guides, and online resources that provide comprehensive coverage of the JAMB Chemistry syllabus. Engaging with research materials can significantly augment one’s readiness for the JAMB Chemistry examinations. Research materials encompass a range of scholarly sources, such as academic journals, scientific articles, research papers, and online resources from reputable origins.

What should I read in chemistry for JAMB?
What should I read in chemistry for JAMB?

These resources offer comprehensive analysis and knowledge on particular subjects, enabling a more profound comprehension that surpasses the scope of conventional textbooks. By utilizing scholarly resources, one can delve further into particular domains of chemistry that elicit curiosity or are emphasized in the course curriculum. Possessing a profound level of knowledge can distinguish you from other candidates and enhance the comprehensiveness of your understanding.

The field of chemistry exhibits a dynamic nature characterized by the continuous evolution of trends and the emergence of new discoveries. Research materials play a crucial role in facilitating the acquisition of up-to-date information, thereby ensuring the currency and relevance of one’s knowledge.

Also see:

Conclusion: So far, i have showed you the recommended syllabus for JAMB Chemistry examination, how to pass Jamb chemistry exam and other things you need to know about JAMB examination. I hope this was helpful to you? Kindly drop a comment at the end of this post to let me know.

Meanwhile, i enjoin you not to waste the information you just got from this website. Make sure that you read hard with this syllabus and pay attention to the tips shared here. I strongly believe you will pass your chemistry examination with flying colors.

This Post Has One Comment

  1. Chukwuemeka Mechruz

    Hmmmmmmmm

Comments are closed.